Tuesday, January 18, 2011

DIY Mosaic Wall Art


Inspired by Remodelaholic.


Sometime in June I picked up all the supplies and set to work. Well, let me start by telling you this is one hell of a project to take on. For days I sat at the dining room table (while watching late night Lifetime movies of course) gluing each little square on to the board. Like most projects, I quickly became bored of it and set it aside in the basement for months.

But alas there comes a time when you start another project that then fuels you to complete your unfinished projects. You see, Thanksgiving was nearing and we were expecting a house full of guests so that basement bedroom needed to get done. That meant either I finish the mosaic wall art or trash it. So I decided I can't throw anything away I might as well finish it.

The instructions posted on the link above are pretty straightforward. however, I did tweak them a little to fit my needs.

Step 1: Gather your supplies. I chose to use an artist's canvas because I found it easier and cheaper then going to the hardware store, having them cut a piece wood for me, painting it, and then having to rig framing hardware onto the board.  For this project I used:
8 sheets of 12x12 cardstock in varying colors/textures
one artist's canvas in size of your choice (it's okay to use the type with staples on the sides)

Step 2: Cut your sheets of cardstock down to 1"x12" strips, then down to 1"x1" squares. For the 24x24 canvas, I ended up only needing six 1"x12" strips of each of the eight colors.

Step 3: Start gluing! I tried using a glue stick at first, but that didn't work so I just ended up using Mod Podge. And because I'm a horrible blogger I didn't take any pictures. But I did sketch something up in paint for you. I essentially started at one corner and worked off that, like this:
One problem I did encounter was that my cutting skills weren't 100% precise. Some squares were off by 1/1,000,000 of a millimeter (total exaggeration, of course) and that would throw off the straight edge that the squares create. So instead of just cutting new squares I would search all 576 squares (I didn't actually count the squares. I just did the math and yes, I actually do know how to do math) to find one that would fit next to the stupid square.

The craft store discounted this canvas because it had a tear, but the squares covered it up nicely. Win-win!

Step 4: Continue gluing until you have covered the entire face of the canvas. Now you want to cover the sides of your canvas that are still visible. To cover the frayed corners of the canvas I just folded a square in half and glued it over the 90degree corner.Then glued over it with another square to continue the pattern.



The sides of my canvas were actually 1-1/2" wide so instead of cutting the squares to fit I just glued them on and folded the excess over the edge of the canvas. I found this method made the lines look cleaner.

Step 5: Once all squares have been glued take the paint brush and slap on a layer of Mod Podge across the entire face and sides of the canvas. Let dry.



Step 6: Hang and enjoy!

Right now it's just hanging on a bare wall, but if Craig and his List would stop trying to sell me crap dressers or extremely over priced dressers then I might be able to remedy the situation. Come on Craig, I'm counting on you!

COST BREAKDOWN
24x24 Canvas - $10  (it was discounted due to the canvas being ripped)
Mod Podge - $6
8 sheets of 12x12 cardstock in the colors of your choice - $4
GRAND TOTAL = $20

PARTY HARDY

46 comments:

  1. I love how yours turned out. From the first picture I wondered if you used tiles or something. Unfortunately, I wouldn't be able to touch this with a ten-foot pole. I have such a hard time getting a straight line cut!

    ReplyDelete
  2. Gaby, THIS is awesome, REALLY REALLY awesome. I can't believe you let it sit for months, and now that it's done you're like WOW, that is awesome.

    I LOVE lifetime movies, they can sure draw you in for hours, lol.

    THANK YOU so much for supporting my blog, and linking up to **Amaze me AUgust** I actually haven't seen you link up for a while, I'm SUPER glad you're back, and did you change the name of your blog, I do not remember there being anything about owls hooting, he he.

    Oh, and have you set your vote for me girl, PLEASE go vote, only THREE more days left of me bugging everyone. You can vote everyday at this link .......http://lambaround.blogspot.com/........ I REALLY want to win Best Of Show. THANKS GIRL!!!

    ReplyDelete
  3. Nat, I totally understand how you feel about the cutting. I used a paper trimmer so that helped a little, but cutting them the exact same size... ugh. Frustrating!

    Bella, I was super busy with school so my blog and house projects were on the back burner until the semester finished. Now that I'm on winter break I've been churning out projects like crazy. I just need to find time to post them all! I did change the name of my blog. I have a thing for owls and felt that "After the Before, but Before the After" just wasn't representing who I am. I think the owl theme represents my personality a little better :) I'm going to go vote for you right now!

    ReplyDelete
  4. I love the colors, and I've been wanting to do something like this but I thought you had to use paint color samples, and I didn't want to have to collect them. This is much easier!

    ReplyDelete
  5. Hi Gina! Thanks for stopping by! Since I finished this I've seen a few similar projects done with paint chips. But I'm with you, I wouldn't want to have to collect so many chips.

    ReplyDelete
  6. Wow, this is really a huge project! I think you did a great job, and ended up with wonderful art to hang on your wall. Hugs, Heidi

    ReplyDelete
  7. Thank you Heidi! It sure was a big undertaking and I'm so glad I finally finished it. Thanks for stopping by!

    ReplyDelete
  8. What an awesome piece of art! I love the color combination you chose.

    ReplyDelete
  9. Thank you, Amy! I chose those colors specifically to match the decor of my master bedroom.

    ReplyDelete
  10. Hi Gaby-
    I have an old blank canvas waiting for me to do something with - I think I just found my inspiration. It looks like a fun project to make plus looks great on your wall.

    On another note - Thanks for commenting on my stair redo. I grew up in a split level home and know the kind of stairs you are talking about. Maybe you can start with one set at a time so it won't seem so overwhelming. I wish I had not waited so long.
    My best- Diane

    ReplyDelete
  11. I am so inspired to give this one a try, thanks for sharing your talent.

    ReplyDelete
  12. @ Diane - I'm glad I could inspire you! I started the stairs project with the smallest sets of stairs on the split level. The demo alone took me 3 hours and it was only 4 steps!!

    @ Olivia - I'm glad I inspired. If you do try it out please share it with me!

    ReplyDelete
  13. Well thats the first time ive listened to that there is a reset button on your cartridge, you might conserve
    cash by merely using this idea, does this mean i could
    refill the cartridge myself and push the remainder button and my printer will accept that
    the cartridge is complete.

    My web-site - xerox phaser 8560 maintenance kit

    ReplyDelete
  14. It is truly a great and helpful piece of information. I'm happy that you simply shared this helpful info with us. Please stay us up to date like this. Thank you for sharing.

    my weblog - xerox phaser 8560 ink cartridges

    ReplyDelete
  15. What's up to every body, it's my first pay a visit of this blog; this weblog includes amazing and in
    fact fine data in support of visitors.

    Here is my web blog - Xerox Phaser 8560 Ink

    ReplyDelete
  16. The best item is the ring while using the outline of Africa into it.
    My country isn't perfect but it is my country and i'm
    proud as a South African. I'd personally desire to own a sheet of Duke and Duch jewelry.

    Look into my website - pinoymingle.com

    ReplyDelete
  17. Yes, you could download Hp Laserjet 1020 printer motorists from this site, plz follow this like for Hp laserjet vehicle driver Download for hp 1020.


    Here is my web site ... Xerox phaser 8560 maintenance kit

    ReplyDelete
  18. Hey There. I found your weblog the usage of msn. That is a very well written article.
    I will be sure to bookmark it and come back to read extra of your
    helpful information. Thanks for the post. I will certainly return.


    Also visit my weblog: st8ment jewellery

    ReplyDelete
  19. My spouse and I stumbled over here from a different page and thought I may
    as well check things out. I like what I see so now i'm following you. Look forward to finding out about your web page repeatedly.

    Feel free to surf to my site - Private Cloud Hosting

    ReplyDelete
  20. Great work! That is the type of information
    that should be shared across the internet. Disgrace on the seek engines for no
    longer positioning this publish higher! Come on over
    and discuss with my website . Thank you =)

    Also visit my site xerox 8560 cartridges

    ReplyDelete
  21. I adore the Innocence of Love Pendant i love the Duke & Dutch range.
    We would want to own some of Scroll & Heart earrings too!


    My website danon jewellery england

    ReplyDelete
  22. Many thanks ... collaborated with my Lexmark E210 on Windows 8 Pro.


    Also visit my web-site Xerox phaser 8560 toner

    ReplyDelete
  23. Very descriptive blog, I liked that a lot. Will there be a part 2?


    Feel free to visit my web blog ... den6v4yoeh.inube.com

    ReplyDelete
  24. Thanks for one's marvelous posting! I really enjoyed reading it, you're a great author.
    I will be sure to bookmark your blog and may come back from now on.

    I want to encourage you to definitely continue your great work, have a nice weekend!



    Also visit my web blog: xerox 8560 black

    ReplyDelete
  25. Wrought Iron Mirrors pleasant blog!! Beautiful

    Feel free to surf to my web blog :: silver jewellery sets

    ReplyDelete
  26. Sir, pls send out that video to my e-mail I.
    D. It will be assistance ful 2 make pcb easy. Thankyou.

    My web page ... http://focuslcd.com

    ReplyDelete
  27. Very descriptive blog, I loved that bit. Will there be a part 2?



    Here is my page - xerox 8560 toner

    ReplyDelete
  28. I'm gone to tell my little brother, that he should also go to see this weblog on regular basis to take updated from most up-to-date information.

    Check out my web-site: xerox 8560 toner

    ReplyDelete
  29. This article will help the internet people for building up new
    blog or even a weblog from start to end.

    Here is my web page :: hultquist bracelets

    ReplyDelete
  30. Thanks a ton Marsha! Marianne is in line... I will be capable to show you how to try this cane.
    With my new caning courses I am capable of taking the mystery right outside the cane making process!
    You will be making great beads in this way
    right away!

    Here is my web-site; contemporary silver jewellery

    ReplyDelete
  31. How to clean discolored jewellery? I've some jewellery which is beginning turn rusty and orange in color or becomes faded. Any methods to remove this rust and brighten the faded areas?

    my web page :: danon jewellery ltd - http://www.ultimate-wuerzburg.de/ -

    ReplyDelete
  32. Hello mates, how is everything, and what you would like to say regarding this article,
    in my view its in fact remarkable designed for me.

    Take a look at my blog post: xerox 8560dn printer

    ReplyDelete
  33. Amazing blog! Is your theme custom made or did you download
    it from somewhere? A theme like yours with a few
    simple adjustements would really make my blog shine.
    Please let me know where you got your theme. Many thanks

    my website: xerox 8560 service manual

    ReplyDelete
  34. How do I clean discolored jewellery? We've some jewellery that may be commencing to turn rusty and orange in color or becomes faded. Any easy methods to remove this rust and brighten the faded areas?

    Feel free to visit my homepage; handmade silver jewellery

    ReplyDelete
  35. great video loved seeing your process!

    Feel free to visit my web page ... ,jewellery discount (www.gpva.net)

    ReplyDelete
  36. It is thе beѕt timе to make some plans for the
    futuге and it's time to be happy. I've read
    this pοst and if I could I ωant to suggeѕt yοu somе inteгestіng thіngѕ
    οr suggeѕtіons. Pеrhaps yοu сoulԁ
    wгіte next аrticles refеrгing to thiѕ
    аrtiсle. I wish tο reаd evеn more thingѕ about it!


    Havе а lοok at my blog :
    : facebook login connеct ()

    ReplyDelete
  37. I know this if off topic but I'm looking into starting my own blog and was curious what all is required to get set up? I'm assuming having a blog like yours would cost a pretty penny?
    I'm not very web savvy so I'm not 100% sure. Any tips or advice would be greatly appreciated.
    Many thanks

    My site - pilgrim jewellery ireland

    ReplyDelete
  38. You are fantastic. I've been so upset.
    Thank you, thank you, thanks.
    Patty.

    Look into my blog - xerox phaser 8560 maintenance kit

    ReplyDelete
  39. I've put up Samsung Universal driver initially. And now my ml-1210 doesn't operate and gain 8 limiting
    me from changing its motorist to ml-2250, pointing out that present
    (not operating) driver is the better one.
    Exactly how did you dealt with this?

    Also visit my blog xerox phaser 8560mfp d

    ReplyDelete
  40. I often believe the suggestions are really informative. To me,
    this time, there were too many generalizations for a person that doesn't already know about printers.

    Also visit my site; xerox phaser 8560

    ReplyDelete
  41. Hey, Do you believe its also terrific to purchase an utilized
    inkjet for estate usage? Where can i locate Amazon or
    Best-Buy?

    Also visit my blog post: xerox phaser 8560 maintenance kit

    ReplyDelete
  42. Gоοd way of telling, anԁ fastidious pοst to obtain facts on the topiс of my pгesеntation ѕubject, which
    i am goіng to conνey in schоol.



    Viѕit my wеb page facebook phone number

    ReplyDelete
  43. Good tips! You might like to take a look at or
    posts about jewelry care, tarnish prevention,
    and silver storage.

    Also visit my site ... silver jewellery - -

    ReplyDelete
  44. Well thats the very first time ive heared that there is
    a reset button on your cartridge, you can save cash by just utilizing
    this pointer, does this mean i can easily fill up the
    cartridge myself and push the remainder button and my printer
    will certainly accept that the cartridge is full.

    my web-site :: xerox phaser 8560dn

    ReplyDelete
  45. HP Color LaserJet C8560A Black Imaging Drum. The HP Colour LaserJet 4650 set perks much from this drum.

    Valued.

    Take a look at my weblog; xerox phaser 8560

    ReplyDelete
  46. Ηello there! Would уou mind if I shaгe your
    blog with my mуspaсe gгoup?
    There's a lot of people that I think would really enjoy your content. Please let me know. Thank you

    my web page :: facebook log in

    ReplyDelete